contact yochoiccontact yochoic CONTACT YOCHOIC
  • Add:No.226,Taopu Road,Shanghai
  • P.C.:200331
  • TEL:+86-021-52856921
  • FAX:+86-021-52859644
products listproducts list PRODUCTS LIST
Home>>Pipefittings knowledge>>Flange


A flange is an external or internal rib, or rim (lip), for strength, as the flange of an iron beam or I-beam (or a T-beam); or for a guide, as the flange of a train wheel; or for attachment to another object, as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera. Thus a flanged rail is a rail with a flange on one side to keep wheels, etc., from running off. The term "flange" is also used for a kind of tool used to form flanges. Pipes with flanges can be assembled and disassembled easily.

Plumbing or piping

A flange can also be a plate or ring to form a rim at the end of a pipe when fastened to the pipe (for example, a closet flange). A blind flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together. Surrey flangeAlthough the word flange generally refers to the actual raised rim or lip of a fitting, many flanged plumbing fittings are themselves known as 'flanges': Common flanges used in plumbing are the Surrey flange or Danzey flange, York flange, Sussex flange and Essex flange. Surrey and York flanges fit to the top of the hot water tank allowing all the water to be taken without disturbance to the tank. They are often used to ensure an even flow of water to showers. An Essex flange requires a hole to be drilled in the side of the tank. There is also a Warix flange which is the same as a York flange but the shower output is on the top of the flange and the vent on the side. The York and Warix flange have female adapters so that they fit onto a male tank, whereas the Surrey flange connects to a female tank. A closet flange provides the mount for a toilet.

Pipe flanges

There are many different flange standards to be found worldwide. To allow easy functionality and inter-changeability, these are designed to have standardised dimensions. Common world standards include ASA/ANSI (USA), PN/DIN (European),[1] BS10 (British/Australian),[2] and JIS/KS (Japanese/Korean). In most cases these are not interchangeable (e.g. an ANSI flange will not mate against a JIS flange). Further, many of the flanges in each standard are divided into "pressure classes", allowing flanges to be capable of taking different pressure ratings. Again these are not generally interchangeable (e.g. an ANSI 150 will not mate with an ANSI 300). These pressure classes also have differing pressure and temperature ratings for different materials. Unique pressure classes for piping can also be developed for a process plant or power generating station; these may be specific to the corporation, engineering procurement and construction (EPC) contractor, or the process plant owner. The flange faces are also made to standardized dimensions and are typically "flat face", "raised face", "tongue and groove", or "ring joint" styles, although other obscure styles are possible. Flange designs are available as "welding neck", "slip-on", "boss", "lap joint", "socket weld", "threaded", and also "blind".
Home About Us Products Contact Us Factory Photograph